Vintage bike front lamp handlebar mount

Mounting brackets for vintage retro bike lamps tend to brake due to vibrations. If you have an old bike, replacing them requires unmounting the front brake caliper and possibly the front fender as well. Not speaking of getting the new bracket.

So, here comes an easily printable bracket that will allow you to mount the light to the handlebars!

Print with PET-G, as many perimeters as you can. Layer height 0.2mm should work well.

You will need two M5 screws for mounting the bracket to the handlebars and one M6 screw for mounting the lamp.

Designed for 22.5mm handlebars. Source file attached if you need another diameter.