Bộ chuyển đổi đạn Talon cho súng Matrixfire

Replaces the Matrixfire hopper to allow it to feed from half dart magazines. Fires even faster than the full length mag conversion.

Shooting demo: https://imgur.com/a/KVH4zdz

It might not be the most elegant model, but it works. Since I could not move the pusher closer to the flywheels I had to move the flywheels closer to the pusher. That means that you will have to do a bit of shell cutting to fit this adapter. However, you can convert this back to use the full length magazine adapter and hopper if you wish. There are 2 covers for this, a blank one and one with a funny cat on it. Print the cover so that it is facing up, then glue the back pieces on it.

I specifically designed this to work with buffdaddy's flywheel cages for the Matrixfire, here: https://www.thingiverse.com/thing:4907272 ,so if you already have a modded Matrixfire you should be able to reuse that cage in this adapter. I don't know if this would work with the stock cage. I don't recommend it, since I get around 100 fps with full length darts using the stock flywheel setup on 12v. I would imagine half darts would get even less than that.

I use Worker smooth wheels in my setup, wheels with a larger diameter might not work. You might need to shift the motor housing in the flywheel cage a bit if that is the case.

Also included is a mounting plate for 21a switches for a full rewire.

You also might be interested in Cake's other Matrixfire stuff, like the extended battery door, stock, and various muzzles.

Hardware:

At least 1 pen spring for the magazine release.

A long M3 Screw for the magazine release.

Plus the stuff needed for a rewire: Switches, wire, flywheels and motors, etc