Giá đỡ tường mở cho Raspberry Pi 3B+, 4 và 5

By mintonette

Downloads: 175
Likes: 22
Views: 605
Remixes: 0
Comments: 6

Download all (.zip)· 10 files · 26.1 MB· 26.1 MB

Files 10 26.1 MB

pi_wall_mount_4mm_clearance_1766198131.stlSTL · 5.6 MB
pi5_wall_mount_4mm_clearance_1766198133.stlSTL · 4.1 MB
pi_wall_mount_7mm_clearance_1766198134.stlSTL · 6.6 MB
pi_wall_mount_blank_4mm_clearance_1766198135.stlSTL · 4 MB
pi_wall_mount_blank_7mm_clearance_1766198136.stlSTL · 5.1 MB
pi_wall_mount_4mm_clearance_1766198139.stepSTEP · 166.9 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #56682
Category: DIY
Published: 04/04/2025
License: Creative Commons — Attribution — Noncommercial — Share Alike
Tags: thingiverse
wallmount
nosupport
raspberrypi
supportless
raspberrypicase
wallhanger
raspberrypi4
raspberrypi3
raspberrypi5
raspberrypi5case
raspberrypi3b
raspberrypi4mount
raspberrypi3bplus
raspberrypi3bmount

Show more tags Show fewer tags

Description

Simple open wall mount designed for the Raspberry Pi 3B+, Pi 4 and Pi 5. All ports and pins are accessible.

No additional hardware needed; the Pi is held in place firmly by 3 clips. The Pi 5 version has one clip in a slightly different position, however should still be compatible with the previous models.

Important note: if using the cross shaped screw holes, check your screw head is not touching (and shorting) the back of the board. I have included an 7mm clearance version to accommodate larger screw heads.

Recommend printing everything above the 3mm base at 100% concentric infill (or increase the number of perimeters/walls) to achieve the best quality mounts and clips.

No supports needed.

4mm clearance version pictured.