Skip to main content
F3D
Giá đỡ đèn LED Hue cho TV và các bề mặt khác 1

9 images

Ý Tưởng Khác

Giá đỡ đèn LED Hue cho TV và các bề mặt khác

By JJKing42

Downloads
47
Likes
9
Views
335
Comments
1

Files 6 248.4 KB

  • HUELED-CLIP-90DEG-SCREW_1767933659.stlSTL · 35.3 KB
  • HUELED-CLIP-SONYTV-Square-Short_1767933660.stlSTL · 61.9 KB
  • HUELED-CLIP-SONYTV-Purchase_1767933660.stlSTL · 8.9 KB
  • HUELED-CLIP-SONYTV-Square_1767933661.stlSTL · 54.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

The 90degree model is intended for situations where you are unable to screw into the intended mounting surface, but able to screw in the adjacent surface. Such as mounting under a wooden table, with a steel frame or just a very thin ledge. 

Flat model pretty much speaks for itself. 

Both the flat and angled model leave 0.5mm for squeezing the strip in place in the top, as well as a combined 1mm squish in the sides. Not ideal for placing ontop of the cob-LED in the middle of a segment. Although i do print mine in transparent PETG in case this just happens to line up with the CW or WW LEDs.


Included some mounts i made for a Sony 55'' TV, to mount a strip to the back for lighting up the wall with automations linked to the function of the connected Apple TV.

The models intended for the recessed screws have notches intended for zip-tieing if needed. -Beware that you will have to squeeze the strip quite a bit if you intend to use the original screws. And that bridging will need to be on point so the screw has a chance to reach. I did manage to use the originals though.

Read more Show less

Print spec

Formats
stl
Model files
6
Total size
248.4 KB
Largest file
64.9 KB

1 comment

See all