Skip to main content
F3D
Móc treo đa năng cho tóc nối và vật dụng khác 1

1 image

DIY

Móc treo đa năng cho tóc nối và vật dụng khác

By gsgx

Downloads
56
Likes
8
Views
293

Files 3 38.6 MB

  • HookedHanger_1766327239.stepSTEP · 7.6 MB
  • HookedHanger_1766327240.stlSTL · 2.4 MB
  • HookedHanger_1766327242.f3dF3D · 28.6 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#5542
Category
DIY
Published

Description

A remix of clsinwv's design, but created from scratch in Fusion 360 with some improvements. My Fusion 360 file is included if you want to make changes. This was made for hair extensions, but could probably be used for a number of other things.

Angling the hooks at 45 degrees removes the overhanging edges and allows them to be printed without supports, while still being able to hold the hair extensions. Additional overhangs were also removed, resulting in the print using less material and not requiring any supports. Finally, some minor edits like rounding some sharp edges were made.

Printed on a Bambu P1S with a 0.4 mm nozzle, 0.2 mm layer height, 15% infill, and with PLA. Also used a brim when printing, may not be required.

Read more Show less

Print spec

Formats
f3dstepstl
Model files
3
Total size
38.6 MB
Largest file
28.6 MB

0 comments

See all