
Mặt nạ quái vật la hét cho Halloween
- Downloads
- 94
- Likes
- 25
- Views
- 647
- Remixes
- 0
- Comments
- 2
Files 3 74.7 MB
- mask-teeth_1766376132.stlSTL · 1.5 MB
- mask-clamp_1766376133.stlSTL · 312.2 KB
- mask-hires_1766376134.stlSTL · 73 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #55396
- Category
- Cosplay
- Published
Description
Could and should be combined with see-through cloth for the eye sockets and mouth, and painted. Teeth are optional, but included as a separate stl – should printed with the pointy things up. I glued them in place with a hot melt glue gun. Simple strap fasteners also included in a separate stl.
I printed the mask standing upside-down with strong tree supports and support for PLA material, tilted slightly. That yielded a 7h30m print time on the X1C. Without switching back and forth to support material it'll print a lot faster. The standing print may or may not work for you, depending on your setup. It does run the risk of falling over, especially if you use a separate support material which may not bond enough to keep the mask steady. So if you do print it upright, with a weak bonding support material, be sure to generate enough supports to hold it in place.
Please share pictures if you print and adapt it.
Print spec
- Formats
- stl
- Model files
- 3
- Total size
- 74.7 MB
- Largest file
- 73 MB
2 comments
You may also like 12 models
See all-

-

-
New -

-

-

-

-

-

-

-

-


