
Biểu tượng bia mộ 62cm cho Halloween
- Downloads
- 28
- Likes
- 7
- Views
- 324
- Remixes
- 0
- Comments
- 0
Files 8 158.1 MB
- Headstone-RIP_0.2mm_PLA_MK3S_1d9h26m_1755121735.gcodeGCODE · 129 MB
- Headstone-RIP_1755121714.stlSTL · 1.5 MB
- Headstone-curve-scarred_1755121717.stlSTL · 1.6 MB
- Headstone-straight-scarred_1755121719.stlSTL · 3.4 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #53438
- Category
- Sự Kiện - Lễ Hội
- Published
Description
62x42x5 cm / 24,4x16,5x2 inches. Use cardboard for the middle of the stone.
You can print all parts on one plate. I have included 3mf files for Bambu Lab X1/P1P and Prusa i3 MK3S. You will need around 480 grams total of filament for this print.
Print settings:
When printing with a 0.4 nozzle, 1× 0.6mm wall, layer height 0,2 mm, 0% infill and 3× top and bottom layers. Use a brim. No supports needed.
It is a 11 hours print with Bambu Lab PLA on the Bambu Lab X1.
On a Prusa i3 MK3S it takes 1 day and 9 hours according to Prusaslicer. I have made the parts a little bit less deep to get them to fit on one MK3S plate.
Print spec
- Formats
- 3mfgcodestl
- Model files
- 8
- Total size
- 158.1 MB
- Largest file
- 129 MB











