Ròng Rọc PC Blend Prusa

By Prusament

Downloads: 1,959
Likes: 461
Views: 12,359
Remixes: 1
Comments: 0

Download all (.zip)· 4 files · 21 MB· 21 MB

Files 4 21 MB

kladka_pc-blend_mk3s_6h1m_1766341622.gcodeGCODE · 18.1 MB
shaft_1766341618.stlSTL · 146.9 KB
pulley-body_1766341619.stlSTL · 2.1 MB
wheel_1766341620.stlSTL · 786 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

Puli carbon fiber Prusa đa năng cho ứng dụng thể thao biểnByPrusament · 04/02/2025

See all 1 remix

Details

Model ID: #52639
Category: DIY
Published: 04/02/2025
License: Creative Commons — Attribution — Noncommercial

Description

This Pulley is universal and recommended for various purposes. Fine example is yachting. It is made from three parts and connected with M4 screw. In case you need different size, you can scale it to 125% using M5 screw, 150% using M6 screw and 200% using M8 screw. Recommended material for this Pulley is our Prusament PC blend.
Not recommended to use as safety feature.

Print instructions

How to print from Prusament PC Blend:

We recommend placing the objects into the center of the print sheet to achieve a good adhesion thanks to even heat distribution. A useful addition is the skirt (draft shield), a thin wall around the object. It creates a microclimate around the printed object and blocks air circulation.

Do you need to add the Prusament PC Blend print profile into PrusaSlicer? Make sure you’re running PrusaSlicer 2.2.0 or newer. Go to Configuration - Configuration Wizard - Filaments - PC - check the Prusament PC Blend option and press Finish. Now, PC Blend will be available in the list of materials.