Nhện và mạng nhện trang trí Halloween

Spider and Spiderweb designed in Fusion 360.

You can set the nozzle diameter to 0.5mm for a single wall line on the Spiderweb (even with a 0.4mm nozzle). I even tested 2 extrusion lines per Spiderweb-line (set nozzle to 0.4mm and horizontal expansion to +0.1mm) - so the Spiderweb is a little stronger.

The 5 Tabs on the Spiderweb can be fixed to the wall with double sided tape or normal tape (like I did it - see the picture).

The Spider has a gap where the lose end of the Spiderweb can be sticked in - if you print it using TPU you can stretch the spider to attach it to the Spiderweb very easy - no glue required.

If printed in PLA you can modify the angle of the lose end by warming it a litte with a lighter and glue the spider to the web.