Skip to main content
F3D
Đèn sàn thông minh WLED sử dụng LED Strips ws2812b 1

6 images

Đồ Gia Dụng

Đèn sàn thông minh WLED sử dụng LED Strips ws2812b

By ZRNNN_302871

Downloads
26
Likes
10
Views
537

Files 3 1.3 MB

  • Bottom_1766163344.stlSTL · 394.6 KB
  • Top_1766163345.stlSTL · 608.3 KB
  • LED_Bodenlampe_1766163346.3mf3MF · 321.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Since the philips hue floor lamp is kinda expensive i created my own version for a simple but smart floor lamp. For complete assembly you dont have to be a programming genius neither a NASA engineer.

Things you need for complete assembly:

  • The 3D-printed parts
  • some Arduino like Controller (ESP32/ESP8266)
  • An LED Lightstrip (i used 1m of WS2812b)
  • A Double LED Channel / Aluminium Profile (dimensions are in the picture)
  • A Power Supply fitting your LED stripe (For me its a 5V DC)
  • AC Power Cord with length to your liking
  • 4x M3 screws
  • 1x Cable tie

For the Software:

If you're not familiar, just search for “wled installer” it should be pretty self explanatory and is well documented.

Notes:

  • You can wether solder the electronic connections directly or use some kind of wago clips to have a non permanent connection.
  • Since you are using a double LED aluminium profile u can choose to use 2 or 3 rows of your LED strip. I started using a single LED strip with 144 LEDs per meter and in retrospect is shopuldve used 2 rows to achieve a better overall brightness.
  • check if your DC power supply is fine with the amount of LEDs you've got: wled-calculator
  • WLED has a phillips hue integration that works pretty well. You just need to have one hue light (and bridge) active, which your own wled stipes can sync to.
  • a 5V LED Strip can supply voltage for the Microcontroller, which was the main reason not to go for a 12V light Strip

Read more Show less

Print spec

Formats
3mfstl
Model files
3
Total size
1.3 MB
Largest file
608.3 KB

0 comments

See all