Skip to main content
F3D
Bamboo Lab - Xô từ tính cho X1 và P1 Series 1

3 images

Large file collection Máy In 3D

Bamboo Lab - Xô từ tính cho X1 và P1 Series

Remix of Thùng rửa Bambu Lab cho X1 hoặc X1 Carbon By cleberlop

By Nivenante

Downloads
7,087
Likes
715
Views
24,693
Remixes
2
Comments
214

Files 22 4.5 MB

  • BambuLab_Bucket_Magnets_d5x3mm_1766210265.stlSTL · 213.5 KB
  • BambuLab_Bucket_Magnets_d5x5mm_1766210266.stlSTL · 213.5 KB
  • BambuLab_Bucket_Magnets_d6x2mm_1766210267.stlSTL · 213.5 KB
  • BambuLab_Bucket_Magnets_d6x3mm_1766210267.stlSTL · 213.5 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 2

See all 2 remixes

Description

My Bambu X1C vibrates quite a lot which means sometimes the bucket is being pushed away. When that happens I find filament everywhere on the table. That's the reason why I made this Remix.

If you already printed a bucket without cutouts for magnets, look here.

Because I just couldn't figure out how to mofify a imported .stl I made the files from scratch with Fusion360 by measuring my already printed poop bucket.

----------------------------------------------------------------------------------------------------------------

If you want to help me out a bit and see some stuff I made, work in progress, or models before they will be here consider liking and following my Facebook page, thank you very much - it means a lot to me! :)

----------------------------------------------------------------------------------------------------------------

I included a few different magnet sizes, if you need any others just comment them here or shoot me a message.

  • Print with:
    • PLA
    • 3 wall loops
    • 15% infill
    • no supports are needed
    • no brim needed
  • Additional stuff:
    • Just glue in your magnets into the cutouts.
  • Parts:
    • BambuLab_Bucket_Magnets_d%x%mm
      • Check each seperate description for sizes of cutouts.
      • It needs around 350g filament
    • BambuLab_Bucket_Magnets_Slim_d%x%mm
      • Check each seperate description for sizes of cutouts.
      • Depth is 110mm, should be able to better fit in small spaces behind your printers.
      • It needs around 260g filament
  • Magnets:
    • I have a bunch of those d5x1mm magnets. Depending on the size of the hole i just put the necessary amount in, that ways the magnets are usable more flexible.
    • Here are some d6x3 magnets.
    • Here are some d5x5 magnets.
    • Those are my Amazon ref-links, won't make a difference for you, but helps me :)
  • Updates:
    • 2023.02.12
      • Loosened tolerances for magnet cutouts
    • 2023.05.13
      • Moved cutouts one cm to the left. They should be on the metal now
      • Moved Old Files in a new folder
    • 2023.09.16
      • Added more variants

----------------------------------------------------------------------------------------------------------------

I'm looking forward to your comments and makes. :)

Read more Show less

Print spec

Formats
stl
Model files
22
Total size
4.5 MB
Largest file
215.2 KB

214 comments

See all