Skip to main content
F3D
Giá đỡ pin cho đèn lightsaber Consulaire của Elegant Weapons 1

3 images

Cosplay

Giá đỡ pin cho đèn lightsaber Consulaire của Elegant Weapons

By KingPenguin

Downloads
15
Likes
4
Views
147

Files 3 39.4 KB

  • disc_1766572168.stlSTL · 12.4 KB
  • bracket_1766572169.stlSTL · 4 KB
  • battery_cart_holder_1766572169.3mf3MF · 23.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#49013
Category
Cosplay
Published

Description

After some use, the battery cart in the Elegant Weapons Consulaire lightsaber tends to starting moving freely inside the hilt.

This not only affects the balance of the saber but may also have the battery cart hit the switch assembly.

This very simple system requires no modification of the saber and can be added and removed in an instant. The principle's simple: use the tolerance in the pommel assembly to add a disc that will rest on top of the hilt and be locked in place when the pommel is screwed on.

The bracket part wraps around the battery cart and traps the disc on the top, thus preventing the battery cart from moving.

The only modification that's required is changing the stock nylon cord from the battery cart with something thinner, because once the disc's in place there may not be enough room left inside the pommel to stow the cord.

How to install

  1. Print the 2 objects
  2. Unscrew the pommel, and pull the battery cart out of the hilt
  3. Position the disc part on top of the cart; align the cut-out with the cord slot.
  4. Wrap the bracketpart around the cart and the disc, it should fit nicely into the discs slots.
  5. Put everything back inside the hilt; there should be minimal friction, and the disc should rest on top of the threading of the pommel.
  6. Screw the pommel back on.

Read more Show less

Print spec

Formats
3mfstl
Model files
3
Total size
39.4 KB
Largest file
23.1 KB

0 comments

See all