
Hồ sơ filament PETG OVERTURE cho máy in Bambu X1C
- Downloads
- 424
- Likes
- 40
- Views
- 1,573
- Remixes
- 0
- Comments
- 1
Files 2 14.5 KB
- overture_petg_1766468717.3mf3MF · 14.1 KB
- Overture_PETG_1766468718.zipZIP · 471 B
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #48098
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Attribution
Description
10/21/2023 Important Update: I have found the shrinkage rate that the generic profile I used as a base is off. I have found black is around 98 and clear is 99. Each color may be different. What I did to figure it out was print a 10x10x10mm cube and measure it and calculate the shrinkage. I hope this helps someone else.
Here is my tuned profile for OVERTURE PETG. I found one on discord but it did not work for me.
So I tuned it in Orca with a .4 nozzle and a .2 profile. It may work for other printer, nozzles, layer height. YMMV
I would consider this a starting point not a one size fits all. Finer tuning may be required.
I hope this helps someone. I welcome any feedback or suggestions.
10/2/23 Update: After some fine tuning I found that the shrinkage settings need to go to 99 instead of 95. I will update the files soon.
Print spec
- Formats
- 3mfzip
- Model files
- 2
- Total size
- 14.5 KB
- Largest file
- 14.1 KB
1 comment
You may also like 12 models
See all-

-

-
New -
New -

-

-
New -

-

-

-

-

