Skip to main content
F3D
Trò chơi logic giờ cao điểm với ô tô 1

6 images

Đồ Chơi

Trò chơi logic giờ cao điểm với ô tô

By Martin_44601

Downloads
3,967
Likes
1,791
Views
22,647
Remixes
1
Comments
74

Files 6 20.1 MB

  • container_1766394531.stlSTL · 309.8 KB
  • car_small_cabrio_1766394532.stlSTL · 3.3 MB
  • car_small_1766394533.stlSTL · 3.3 MB
  • car_truck_1766394535.stlSTL · 6.3 MB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

Rush hour rules are easy. Clear the way for the red car to be able to leave the parking lot. Cars can move only forward/backward, no lifting the cars!

Printing:

  • Depending on the challenge difficulty, you'll need to print up to 4 trucks and 12 small cars.  One of the small cars must be printed in red.
  • Parking lot can be printed using filament color change in a layer to highlight lanes and arrows
  • If you want the room to storage challenge cards, you can print attached container.
  • No supports needed.

Other hardware:

  • Besides filament, you'll also need 72 pcs of cylindrical neodymium magnets 5x1 mm (diameter x height). It is not mandatory, but it's much more comfortable to play with magnetic cars. Use supper glue to attach magnets to place.
  • For container, you'll need 8 pcs of neodymium magnets 8x3 mm.

You can generate challenges using online generator, for example here. If you decide to print them, recommended maximum card size is 125x125 mm. I attached several example challenges.

Future outlook: I might build a travel box.

Note: Model is roughly inspired by: https://cults3d.com/en/3d-model/game/chinese-sliding-block

Read more Show less

Print spec

Formats
stlzip
Model files
6
Total size
20.1 MB
Largest file
6.8 MB

74 comments

See all