Skip to main content
F3D
Nút bấm CNC cho bàn phím số LogiLink dưới ESTLCAM 1

7 images

DIY

Nút bấm CNC cho bàn phím số LogiLink dưới ESTLCAM

By SonC

Downloads
79
Likes
12
Views
878

Files 11 2.9 MB

  • Estlcam-Pfeil-45_1766160363.stlSTL · 192.7 KB
  • Estlcam-25_1766160364.stlSTL · 207.2 KB
  • Estlcam-75_1766160365.stlSTL · 179 KB
  • Estlcam-Blank_1766160366.stlSTL · 121.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

These are keys for the popular LogiLink Numpad as a CNC control under ESTLCAM.

If you basically want to know how it works, you can search e.g. on YouTube for "MPCNC Kabellose Fernsteuerung für 10€".

They replace the original keys. Printing is not that easy, so I took screenshots of how I positioned the keys in Cura. Perhaps someone will find a better solution, it is important that the "springs" from the snap-in lugs are horizontal to the printing layers, otherwise they will likely break off. I printed them with PLA on an Ender 3 in the best resolution. Depending on the accuracy of your print, you may have to rework each key with a file / sandpaper after printing until it clicks into place and moves without jamming


Das sind Tasten für das beliebte LogiLink Numpad als CNC Steuerung unter ESTLCAM.

Wenn Ihr grundsätzlich wissen wollt wie das funktioniert könnt Ihr z.B. Auf YouTube nach "MPCNC Kabellose Fernsteuerung für 10€" suchen.

Sie ersetzen die Originaltasten.

Der Druck ist nicht ganz einfach, deshalb habe ich Screenshots gemacht wie ich die Tasten in Cura positioniert habe. Vielleich findet aber jemand auch eine bessere Lösung, wichtig ist das die "Federn" von den Einrastnasen waagerecht zu den Druckschichten liegen sonst werden sie wahrscheinlich abbrechen.

Ich habe sie mit PLA auf einem Ender 3 in der besten Auflösung gedruckt.

Abhängig von der Genauigkeit Eures Druckes müsst Ihr nach dem Druck aber jede Taste mit Feile/Sandpapier nachbearbeiten, bis diese sauber einrasten und sich klemmfrei bewegen.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0,12

Infill:

20

Filament: Doesnt .. PLA Doesnt ..

Category: DIY

Read more Show less

Print spec

Formats
stl
Model files
11
Total size
2.9 MB
Largest file
946.3 KB

0 comments

See all