Ray picatinny bên cho Dart Zone Pro Mk3

This is a piece of side picatinny rail for the Dart Zone Pro Mk3.

It requires you to drill into the side panels as shown in the photos.  You could drill just into the flat parts nearer the top or bottom of the black piece, but I wanted the rails to be centered.  To center the rails, you will also need to clip the ridges on the underside of the black pieces.

I used M3 bolts and nuts to secure the rails.   I want to say that I used 12mm for the one short part underneath the flywheel cage, and 16mm for the others, but unfortunately I forgot.  :(

I would recommend removing the black pieces from the body of the Mk3 to work on them.  In turn this would require you to unmount the flywheel cage (but you don't have to desolder it or anything, just leave it hanging there).

This picatinny rail is remixed from the one by Flygonial for the Gryphon.