Skip to main content
F3D
Nam châm tủ lạnh Zel an toàn và tiện lợi 1

5 images

Đồ Gia Dụng

Nam châm tủ lạnh Zel an toàn và tiện lợi

By Zelrick

Downloads
4,436
Likes
4,074
Views
32,899
Remixes
3
Comments
170

Files 10 2.9 MB

  • Refrigerator_Toggle_Pause_to_insert_Magnets_0.2mm_PLA_MINI_26m_1766169095.gcodeGCODE · 640.3 KB
  • Refrigerator_Toggle_Plugs_0.2mm_PLA_MINI_27m_1766169095.gcodeGCODE · 684.8 KB
  • Refrigerator_Toggle_Plugs_MK3_0.2mm_PLA_MK3S_29m_1766169097.gcodeGCODE · 699.5 KB
  • Refrigerator_Toggle_Pause_to_insert_Magnets_MK3_0.2mm_PLA_MK3S_27m_1766169098.gcodeGCODE · 664.5 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 3

See all 3 remixes

Description

Fridge magnets are great but I don't like that most of them put the magnet dangerously close to the finish on that expensive fridge and removing them to put up a new note or change a picture can be a hassle, if your hands are full.  This Refrigerator note toggle fixes these issues by embedding the magnets in the print and having a magnet in both ends so no need to remove it just toggle it  to free your item.

I have included two versions.

I used 10x2.6mm N42 Grade magnets in both versions, other sizes will probably work fine too. The slots are 11x3mm.  Link to the Magnets I used https://amzn.to/3tauAvd

If you have magnets of other sizes or grades, I have not tested them and therefore, can't say that they will work.

One version pauses the print so you can insert the magnets and then finish the print with the magnets imbedded inside.  The 3MF file and the Gcodes include the pause at the correct height.  I suggest putting a bit of CA (super) glue in the slot with the magnets.

The second version doesn't require a print pause, and has plugs to glue into the slots after you insert the magnets, to tidy up the look.

Read more Show less

Print spec

Formats
3mfgcodestl
Model files
10
Total size
2.9 MB
Largest file
699.5 KB

170 comments

See all