Skip to main content
F3D
Posable Rocky with Adjusted Joints (Project Hail Mary) 1

5 images

Đồ Chơi

Posable Rocky with Adjusted Joints (Project Hail Mary)

Remix of Nhân vật chiến binh rồng với thanh kiếm Bezerk By En

By naerina

Downloads
767

Files 16 251.1 MB

  • torso.stlSTL · 12.2 MB
  • 1A.stlSTL · 5.4 MB
  • 1B.stlSTL · 6.9 MB
  • 1C.stlSTL · 8.8 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Disclaimer: I have only tested this design once! I'm not sure how this print will perform at different sizes from what I used.

The key print settings I used were:
-125% size
-PETG
-Organic supports, manually placed
-0.4mm nozzle
-0.1mm layer height

Like a lot of us, I printed that posable Rocky stl. But the design of his joints are less than ideal for fdm printers, requiring a lot of extra supports and post-processing.

I wanted a less painful process. So I remodeled several of Rocky's joints for ease of printing and fitting, namely by removing the horizontal 'split' from several of the pegs and balls, leaving only the vertical. I also added little flanges to the peg joints for extra hold in their sockets once assembled, and bulked up the hinge on a couple of his elbows for better grip to help him hold a pose.

-In PrusaSlicer, I used the 'add a part' workaround to get the legs to hover off the surface of the bed so I could get supports underneath.
-If you're worried about strength, you could add some more perimeters or infill, but for me it wasn't necessary.
-The better your printer does on overhangs and bridges, the better the joints will fit together.

Have fun!

May 16th, 2026
Made a couple edits based on feedback for Leg #4. Added a flat to the 4B hinge, and slightly expanded the 4A shoulder socket. I haven't personally test printed the changes, but if Leg #4 is giving you trouble and you want to try them, they're labeled as "alternate" 4A/4B/All Parts in the model files.

May 19th, 2026
Slightly (SLIGHTLY!!) reduced 4A Alternate shoulder socket size.

Read more Show less

Print spec

Formats
stl
Model files
16
Total size
251.1 MB
Largest file
80.4 MB

0 comments

See all