Skip to main content
F3D
PicoKey Slim Case - TENSTAR RP2350 1

2 images

DIY

PicoKey Slim Case - TENSTAR RP2350

By Sebastien

Downloads
106

Files 2 121.7 KB

  • PicoKey Slim Case - BOTTOM - TENSTAR RP2350.3mf3MF · 63.1 KB
  • PicoKey Slim Case - TOP - TENSTAR RP2350.3mf3MF · 58.5 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This is a remix of the excellent PicoKey Case (RP2350/RP2040) DIY YubiKey/Passkey. All credit for the original concept and base design goes to the author — I only adapted the top shell and trimmed everything I personally didn't need.

Tip — getting a solid USB-A fit

Because the PCB is thinner without the USB shroud, some host USB-A ports won't grip the TENSTAR RP2350 firmly enough to make reliable contact. My fix: three layers of standard electrical insulation tape on the back of the PCB. It bulks the board back up to the right thickness for a snug fit, and — bonus — by using different tape colors, you can visually distinguish multiple keys at a glance (handy if, like me, you own several).

Printing notes

  • Layer height: 0.10 mm works great.

  • No supports needed.

  • Any rigid filament is fine; PETG or ABS recommended if you carry it on you (PLA gets soft in a hot pocket or car).

Read more Show less

Print spec

Formats
3mf
Model files
2
Total size
121.7 KB
Largest file
63.1 KB

0 comments

See all