#300_1 Winged Demon Dragon Skull Statue

If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier that suits you.

FDM Print Difficulty level: [7/10]

[ Suggested Print Settings for 15-20 cm figurine ]
Nozzle: 0.2mm-0.4mm
Layer Height: 0.10-0.2mm
Infill: 5-25%
Wall loops: 2-3
Supports: Tree (auto)
Printed with: PLA

Printed with fuzzy skin effect: (optional)
Fuzzy Skin: Contour
Fuzzy Skin Point Distance: 0.05
Fuzzy Skin thickness: 0.05

[ Works well with: FDM (Filament) printers ]
[ Works best with: SLA (Resin) printers ]

The best quality of the printed figurine will, of course, be achieved by printing this model with resin, where all details will be fully preserved. However, with the right settings on an FDM printer, the result can also be excellent. Keep in mind that very small figurines are not suitable for FDM printing. For best results, it is recommended that the model be at least 15 cm tall when using a 0.4 mm nozzle. If you are using a finer 0.2 mm nozzle, you can experiment with significantly smaller sizes. Ultimately, the level of detail you achieve will depend on both your printer and your chosen settings.

Despite my best efforts, I am not able to print every model myself, so this time I am presenting high-quality renders created in Blender. They show the model exactly as it truly is (these are not AI-generated images). Whenever possible, photos of real prints will also be added here.