Lian Li Vision Compact 8.8" Screen Mount

The screen mount for lian li o11 vision compact with official lian li 8.8 universal screen, not sure if works with other brands screen, or you can just modify it with the OnShape link below.

Printed with PLA Matte, which is enough of heat resistant, if your case temp get to PLA melting temp you should be worry about your pc more than this mount :)))

Bill of material:
250g of PLA
(8x) 6mm x 2mm magnets.
or
(8x) 6mm x 3mm magnets.

Print parameters:

• The model will required a 256x256 bed printer.

• 3 walls (2 walls should be fine but 3 walls for better heat resistant?)

• 15% infill, gyroid to prevent warping.

• Enable Support, Normal support(Default), Top/Bot Z distance 0.12mm (Lower the value if you see top supported part warped).

• Parts fan on as normal, Aux fan off as the layer time is long enough and prevent warping.

• Brim is required for PEI bed, biqu/bbl/other sticky beds brim can be off.

Drop the model into the slicer and split to objects, then orient the parts as the pictures shown above.

Onshape Link
https://cad.onshape.com/documents/081900a68c4b054d12698710/w/cae19002ac199a22c813cafe/e/b7ab007bd2f6ec8d4e0bc25a?renderMode=0&uiState=6a5441006ef2740900d44738