Pool Tiles Cleaner - Surfboard-Shaped

Be sure to print the hairs as overhangs. Use a knife carefully to remove the thin wall so the brush can be used.

Print Settings:

Layer Height: 0.2mm.

Nozzle: 0.4mm.

Infill: 10%.

Perimeters: 3 Walls.

Material: PETG/ASA (PLA can work, but won't last as long).

Support: Required - only for the surfboard, not for the hairs.

Bed adhesion: Raft can help.

*Some of the images were created using Blender.