Đồ chơi Fidget Shulker

Small Minecraft Shulker build with a mechanical switch to make a satisfying click sound :)

Instructions:

To build the Shulker, you need to print a top and a bottom half, plus the keychain part if desired.

I used basic PLA with 0.08 mm layer height and a 0.4 mm nozzle, printed on a Bambu Lab P1P.

Print time ~40min

You will also need a standard mechanical key switch and some super glue.

Apply a small amount of glue to the bottom half and press the switch into place.

Wait until the glue is fully cured.

Snap the top half into place.

You're done :)

Keychain (optional) Before attaching the top part, glue the small anchor piece into the hole on top.

Hope you have fun with the project