Dụng cụ hỗ trợ rút thanh trục X cho MK4

The MK4 brought the 8mm rods closer together, hence the remix.

This tool makes it easier to separate the rods from from the printed X axis parts.

Print Settings:

• PETG

• 0.20mm layer height

• Grid or Gyroid infill

• 2-3 perimeters

• Supports: Only for “press_MK4.stl”

• All STL orientations are correct for printing

• “press_MK4.stl” is unchanged from the MK3 version

Hardware:

• (2) M3x30mm screws

• (2) M3 nuts

• (2) M3 washers (optional)