
Phụ kiện thanh profile LED
- Downloads
- 0
- Likes
- 0
- Views
- 29
- Remixes
- 0
- Comments
- 0
Files 3 688.2 KB
- wagobox_2x2_1785164511.3mf3MF · 257.4 KB
- wagobox_2x3_1785164513.3mf3MF · 263.9 KB
- LED_holder_1785164514.3mf3MF · 166.9 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #416415
- Category
- Đồ Gia Dụng
- Published
Description
Just recently, while moving into a new workshop, I needed new lightning there. I wanted cheap but plenty and I had loads of old LED strips and 19mm profiles, so I created these models. Holders, endcaps and junction boxes, with those I managed to set up all the lights pretty quickly. Still it remains fairly simple to disconnect, replace or otherwise service any lighting fixture connected, without affecting the others.
-
You need to press quite hard for the Wago to audibly click into its place.
-
All parts are supposed to be screwed onto their spots.
-
The cover of the boxes holds well by friction and you can still open it with fingernail (there's a cutout)
-
Those passthrough inserts are glued in the box' wall, if using thicker gauge, can be skipped
-
The box for 3-wire wago is a passthrough, while the variant for 2-wire is meant as the last in the row
-
I used PLA, but any material should be fine here
Print spec
- Formats
- 3mf
- Model files
- 3
- Total size
- 688.2 KB
- Largest file
- 263.9 KB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-

-
New -

-
New -

-
New -


