Móc Treo Tường Bo Tròn – 3 Kích Thước

The model comes in three different sizes, each consisting of:

• a base that's attached to the wall

• a top cover part that slides onto the base

• an optional cover that snaps on around the top

Sizes

Small ( 1 screw )
Suitable for items like standard key rings

Medium ( 1 screw )
Towels, clothing, etc.

Large ( 2 screws )
Backpacks, headphones, cables, etc.

Printing

The parts are printed separately, so you can combine different colours with any printer.

A brim is recommended, especially for the decorative covers and the small version. Unless your build plate is particularly sticky!
Apart from that, the model was designed with printability in mind so no further supports are required.

I've printed them in PLA as well as PETG. Both fit well and are strong enough for towels and backpacks. They will probably hold more but I haven't tested their maximum load.

The example in the photo was printed with 2 walls and 0.2mm layer height.

Surface Tip: Archimedean chords for bottom surface and concentric for top surface work well.