Giá treo Webcam trục Y cho Prusa i3 (Parametric)

This is a Y-Axis bed mount for generic USB webcams with a 16mm (length) screw mount. The webcam normally comes with a clamp mount that can be easily removed with a screwdriver, the original screw and nut are then used to fasten the camera to the mount. Make sure you tighten the screw enough otherwise the jerking of the bed will rotate the camera.

I recommend printing in PETG (100% infill for best stability) with supports on the lifted spot under the camera mount part. Optionally, you can place it upright on one face (as shown in the PrusaSlicer photo) to avoid using supports.

I can't guarantee this will work on MK2 or MK4 printers, but I tested it on my MK3S+ and it fits snugly. Originally this was designed to be screwed in to place on the base of the printer's bed, but with the right tolerances it should stay firmly in place on it's own.

Printer STEP model in FreeCAD project and renders from here