CORE One/+ INDX printed parts
Byprusa-researchLikes0Downloads2.7K
Máy In 3D
Cửa thông gió tự động OneTop INDX cho CoreOne
Remix of Prusa CORE One - Full CAD Assembly (Bộ lắp ráp CAD đầy đủ) By Prusa3D
- Downloads
- 2
- Likes
- 1
- Views
- 101
- Remixes
- 0
- Comments
- 0
Files 2 84 KB
- Autovent-arm_1784882786.stlSTL · 34.8 KB
- Autovent-grille_slider_1784882787.stlSTL · 49.1 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #415332
- Category
- Máy In 3D
- Published
Description
Automatic vent for OneTop with INDX for CoreOne.
Connects with the vent lever of the INDX kit and the grille from the original top using the original screws. No additional hardware needed.
Print with something stiff that will handle the chamber heat. I used ASA-CF 3 walls 20% cubic infill.
Tighten the 3 screws on the vent just enough so the grille moves easily.
Print spec
- Formats
- stl
- Model files
- 2
- Total size
- 84 KB
- Largest file
- 49.1 KB
0 comments
You may also like 12 models
See all-
-
Kẹp giữ sợi Filament
Bytinx_1344834Likes1.2KDownloads6K -
Prusa Core One – INDX Spoolholder Caps
Bypeter-van-der-waalLikes0Downloads257 -
INDX Rear Filament Sensors Holder V2
BykingnothingLikes0Downloads182 -
Cảm biến sợi nhựa CoreOne INDX với khớp nối PTFE | M5 M6 M10
ByfilamentalistLikes71Downloads111 -
INDX Top Cover Hole Plug Grommet
Byp3rr1ff3ryLikes0Downloads150 -
CORE One INDX Filament Sensor Top with PTFE Couplers
ByritchiedcLikes0Downloads140 -
-
Core ONE INDX Tool dock, M3 Nyloc press fit, magnet extraction
Bydominik-chuchlikLikes0Downloads122 -
Khay sắp xếp ốc vít CORE One INDX Founders Edition 8TH
ByBretDorssers_4183352Likes19Downloads55 -
NewCORE One L Pins Mod 5G
Bydet-manLikes0Downloads172 -
NewSelf-closing tweezers V3
BydalleLikes0Downloads147
