Bộ giảm thanh cho Dock sạc Roomba Mini

/!\ Not for the actual robot!!! /!\

Muffler to be put at the air outlet of the dock.

Print the pad first, then the two others. The file Part 4 is the baffle that is fitted into the muffler. I printed it without any bottom nor top layers (horizontally) and with gyroid infill at 25%. See screenshot attached

I printed my parts horizontally so I had to create a bridge to overcome a bad print, hence the Pad. I added a pause in the print right before the bottom layer on the top to insert the pad in the muffler. 

if it isn't really clear, don't hesitate to comment or message me!