Tô Đựng Đồ Twisted Ripple – Vành Hai Màu

Add a flowing sculptural accent to a desk, bedside table, shelf, or entryway.

This compact catch-all bowl combines a softly squared organic outline with concentric twisted ripples that continue from the base into the walls. A raised contrasting rim gives the model a clean two-colour finish and makes the silhouette stand out.

The included 3MF contains the blue-body/red-rim colour painting shown in the photographs and a ready-to-slice Bambu Lab P2S profile. A separate STL is also included for users of other slicers and printers.

Suggested uses:
• Keys, coins and small everyday-carry items
• Jewellery, clips and desk accessories
• Decorative storage and shelf display
• Wrapped sweets or other dry, packaged items

MODEL SIZE
129.0 × 127.8 × 60.0 mm

PRINT ORIENTATION
Print upright with the open side facing upward.

SUPPORTS
No supports required.

RECOMMENDED SETTINGS
• Nozzle: 0.4 mm
• Layer height: 0.16 mm
• Wall loops: 4
• Bottom layers: 3
• Top layers: 5
• Infill: 15% 3D Honeycomb
• Wall generator: Arachne
• Brim: 5 mm automatic brim
• Material used in the supplied profile: PETG HF
• Colour layout: deep-blue body with red rim
• Printer profile: Bambu Lab P2S

SCALING
Uniform scaling is supported. When reducing below approximately 80%, inspect the sliced wall thickness and rim detail before printing.

SAFETY / USE NOTE
This is a decorative storage model and is not certified food-safe. Do not use it for hot food, liquids, or direct food contact unless your material, printer, post-processing, and local requirements are suitable for that purpose.