Skip to main content
F3D
Miếng Cone Cửa CoreOne Giúp Tăng Độ Cứng Khung Máy 1

3 images

Máy In 3D

Miếng Cone Cửa CoreOne Giúp Tăng Độ Cứng Khung Máy

By LowBoom_1717947

Downloads
6
Likes
2
Views
138

Files 2 262.3 KB

  • DOOR_CONE1_1784617547.stepSTEP · 23.2 KB
  • DOOR_CONE1_1784617549.stlSTL · 239.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This cone part creates a tight fit between the door and the frame when you close the door. This improves overall frame stiffness since the door then acts as a shear panel across the front of the machine, where there is no diagonal support.

Bonus: the hardware rigidly mounts the door handle to the door panel, instead of relying on adhesive.

Install two of these, one in the top and one in the bottom hole.

Required hardware:
2x M3 Socket Head Cap Screw 10-12mm long
2x M3 Hex nut

Print with 100% infill, works fine with PLA.
I'm now using a PCCF version.

NOTE: Double check the part OD and mating hole ID before installation. A close slip fit is ideal. Mine was 7.8mm

Read more Show less

Print spec

Formats
stepstl
Model files
2
Total size
262.3 KB
Largest file
239.1 KB

0 comments

See all