
Hệ thống Ngăn kéo Module Tháo rời Toàn diện
- Downloads
- 12
- Likes
- 12
- Views
- 111
- Remixes
- 0
- Comments
- 0
Files 5 704.7 KB
- Base_Plate_1784371074.stlSTL · 163.6 KB
- Drawer_1784371075.stlSTL · 6.7 KB
- Single_Unit_1784371076.stlSTL · 125.9 KB
- Sleeve_1784371077.stlSTL · 119.2 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #414222
- Category
- Đồ Gia Dụng
- Published
Description
Tired of cluttered workbenches, messy desks, or lost screws? This is the ultimate storage solution for makers, crafters, and hobbyists.
It is designed to be incredibly easy to print (no supports needed) and extremely material-efficient—using only 25 grams of filament for a complete drawer/sleeve unit.
Design Features
-
Grid-Based Modularity: Mount the backing grid to your wall, then slide in the individual drawer sleeves wherever you want them. Customize your layout or expand it over time!
-
Removable Drawers: Each drawer slides completely out of its sleeve so you can bring your parts, screws, or components directly to your workspace.
-
Filament-Saving Cutouts: The sleeves feature circular cutouts on the top, bottom, and sides. This reduces print time and keeps material usage down to just 25g per unit without sacrificing strength.
-
Wall Mountable: The backing grid features pre-designed screw holes in the corners for clean, flush mounting.
-
No Supports Required: Designed with clean angles so everything prints beautifully without a single gram of wasted support material.
Recommended Print Settings
To get the smoothest slide and best fit, these slicer settings are recommended:
Setting
Recommended Value
Material
Theoretically any material would work but I have only tested PLA
Layer Height
0.2mm
Walls/Perimeters
2
Infill
0% (there isn't much hollow space anyways)
Supports
None (support-free design)
Brim
None (unless you struggle with bed adhesion)
XY Compensation
0 (tight fit) -0.5 (loose fit) or anywhere in between
Elephant's Foot Compensation
At least 0.2 (the elephants foot is a major pain to deal with)
Customization Ideas
-
Two-Tone Colorway: Print the sleeves in a dark color (like black or dark grey) and the drawers in a bright accent color (like the blue shown in the photos) to make your organizer pop!
-
Labeling: The smooth front face of the drawers is perfect for applying adhesive labels or writing with a sharpie.
If you like this design, please leave a ⭐⭐⭐⭐⭐ review and post your makes! I'd love to see how you customize yours.
Print spec
- Formats
- stl
- Model files
- 5
- Total size
- 704.7 KB
- Largest file
- 289.3 KB
0 comments
You may also like 12 models
See all-

-

-

-
New -
New -

-
New -

-

-
![Hộp Đựng Đồ Tùy Chỉnh Có Tay Cầm [Parametric / Không cần Support]](https://cdn.f3d-ai.com/uploads/public/6a7/099/e59/6a7099e593ded037928349.png?class=sq800)
-
New -


