Toadstool — Hộp đựng kẹo hình nấm vặn mở

A tiny Amanita-muscaria toadstool that twists open to hide a wrapped

bonbon or candy inside. The red spotted cap is a screw-off roof; lift it and

a clean toadstool stalk is revealed — an Amanita skirt ring and a **soft

volva bulb** at the base — with a hollow chamber for a treat.

Designed to the 2.7-inch (68.6 mm) BONBON capsule: closed it is

Ø46 × 52 mm with a min bounding sphere of Ø58 mm, so it drops into the

capsule with room to spare.

What's in this listing

| STL | What | Filament |

|-----|------|----------|

| cottage_body.stl| Toadstool stalk + candy chamber + external thread | tan / stone |

| cottage_cap_2color.stl| Mushroom roof, 2 named solids cap_red+ cap_spots) | red + white |

| cottage_cap.stl| Same cap, single colour | red |

| cottage_spots.stl| White spots only | white |

Multi-colour (Bambu Studio AMS)

Import *cottage_cap_2color.stl** → right-click → Split to Parts → assign

red to cap_redand white to cap_spots. Coordinates are locked, so the spots

land perfectly. Single filament? Just print cottage_cap.stl.

Printing

• Body: flat base on the bed, collar up. No supports.

• - Cap: wide rim on the bed, dome up (narrows to the apex → zero overhangs,

•   spots face up). No supports.

• - 0.2 mm layers, 3 walls. All walls ≥1.5 mm; the coarse 3 mm-pitch thread

•   prints clean at 0.2 mm.

Using it

1. Twist the cap on once to seat the threads (2–3 turns, snug not tight).

2. 2. Drop a wrapped candy (≤ Ø24 mm through the neck; chamber holds ~Ø28 mm).

3. 3. Screw the mushroom roof back on. Surprise sealed. 🍄

Parametric source

The OpenSCAD .scadis included. Knobs at the top: body_d/ body_h/

wall(stalk size + shell), cham_bore_d(candy opening), thr_crest_d/

thr_pitch/ thr_len/ thr_clear(twist thread — raise thr_clearif

tight), cap_d/ cap_h/ cap_wall(mushroom roof), spot_list(spot

placement). Fork it, resize, share what you make.