Mô hình tàu lượn Mini 13

This glider should be printed with NO supports.

Can be printed in PLA and PETG.

If you have a larger printer you might be able to print it at 200%, but I have not tried that yet.

So go big at your own risk. 

To assemble 

1. Locate the small circles on the handles and glider 

       2. Insert the handles into the glider (make sure the circles line up). 

       3. Turn handles 90 degrees to the right and push into the glider. 

       4. Put on mini 13 and glide away!