
Giá đỡ điện thoại để bàn (Smartphone Desk Stand)
- Downloads
- 5
- Likes
- 0
- Views
- 41
- Remixes
- 0
- Comments
- 0
Files 3 3.3 MB
- Smartphone_Desk_Stand_1784109253.stlSTL · 455 KB
- Smartphone_Desk_Stand_V2_1784109254.stlSTL · 687.9 KB
- Smartphone_Desk_Stand_0.4n_0.2mm_PLA_COREONE_2h20m_1784109254.bgcodeBGCODE · 2.1 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #412046
- Category
- Đồ Gia Dụng
- Published
Description
Minimalistischer Smartphone-Ständer mit Wabenmuster (Support-frei)
Ein eleganter, stabiler und funktionaler Smartphone-Halter für den Schreibtisch, den Nachttisch oder die Werkstatt. Das markante Hexagon-Muster verleiht dem Ständer einen modernen Tech-Look, spart Filament und macht das Design zu einem echten Hingucker.
Features:
Smartes Design: Perfekter Betrachtungswinkel für Benachrichtigungen, Videoanrufe oder Videos.
100% Support-frei: Wenn das Modell auf der Seite gedruckt wird (wie auf den Bildern zu sehen), sind keinerlei Stützstrukturen notwendig.
Filamentsparend & Schnell: Dank der Aussparungen extrem leicht und in etwas über 2 Stunden gedruckt.
Sicherer Halt: Die vordere Lippe hält das Smartphone (auch mit Hülle) stabil an Ort und Stelle.
Druckeinstellungen (Empfohlen):
Drucker: Prusa CORE One (oder jeder andere Standard-FDM-Drucker)
Ausrichtung: Auf der Seite liegend drucken
Schichthöhe: 0.20mm (STRUCTURAL / Standard)
Infill: 15% (Grid oder Gyroid)
Material: PLA (z. B. Prusament PLA oder PLA Blend für den glitzernden Effekt)
Supports: Nein (Nicht benötigt)
Technische Daten:
Abmessungen: 60 mm x 69,7 mm x 65 mm
Filamentverbrauch: ca. 32g
Druckzeit: ca. 2 Std. 20 Min.
Minimalist Honeycomb Smartphone Desk Stand (Print-in-Place / No Supports)
A sleek, sturdy, and highly functional smartphone stand for your desk, nightstand, or workshop. The distinctive hexagon pattern gives it a modern tech aesthetic while keeping the print lightweight and eco-friendly.
Features:
Optimized Angle: Perfect viewing angle for tracking notifications, watching videos, or taking video calls.
100% Support-Free: Designed to be printed on its side, completely eliminating the need for support material.
Material Efficient: Smart geometric cutouts reduce filament consumption without sacrificing stability.
Case Friendly: The front lip is wide enough to securely hold most smartphones, even with a case attached.
Print Settings:
Orientation: Print flat on its side
Layer Height: 0.20mm
Infill: 15%
Material: PLA (Looks amazing with filled/glitter filaments!)
Supports: None
Technical Specs:
Dimensions: 60 mm x 69.7 mm x 65 mm
Filament Used: ~32g
Print Time: ~2h 20m
Print spec
- Formats
- bgcodestl
- Model files
- 3
- Total size
- 3.3 MB
- Largest file
- 2.1 MB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-

-

-
New -

-

-

-


