Spinning Battle Top - Bộ Sưu Tập Sparking

Remix of Con quay chiến đấu in 3D (3D Printed Spinning Battle Tops) By stlDenise

By LucasAbdala_482286

Downloads: 0
Likes: 2
Views: 45
Remixes: 0
Comments: 0

Download all (.zip)· 4 files · 1.4 MB· 1.4 MB

Files 4 1.4 MB

Sparking_Blade_One_1784106627.stlSTL · 130.4 KB
Sparking_Blade_Core_1784106628.stlSTL · 174.1 KB
Sparking_Bottom_of_Top_1784106629.stlSTL · 702.6 KB
Sparking_Blades_1784106630.blendBLEND · 376.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #411699
Category: Đồ Chơi Khác
Published: 07/15/2026
License: Creative Commons — Attribution — Noncommercial — Share Alike
Tags: beyblade

Description

✨ Sparking Blades

I recommend using superglue to lock the flint in place. The holes are pretty deep, so they only stick out a little bit. This is to prevent the flint from being ripped out of the blades (which has happened before when testing shallower holes). Regarding materials, I tried PETG with 5 perimeters and 100% infill, and it still broke pretty quickly. Maybe nylon is a better choice since it has good impact resistance.

Parts List

Sparking Blade x1

Lighter Flint x6

✨ Sparking Bottom

This didn't work at all in my tests 🥲, but if you have a super heavy top and a rough surface, it might - or if you spin it crazy fast, idk. You will need to cut the ferrocerium rod down to around 10mm if you want to keep the standard top height. Be careful and do it slowly to avoid generating sparks.