DIY
Kìm tháo vòng chặn C-clip
- Downloads
- 1
- Likes
- 0
- Views
- 19
- Remixes
- 0
- Comments
- 0
Files 2 9.7 MB
- ClipPliers-Body_1784100564.stlSTL · 543 KB
- ClipPliers_1784100565.fcstdFCSTD · 9.1 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #411235
- Category
- DIY
- Published
Description
Pliers for removing C clips.
Printed in PETG with 5 perimeters and 50% infill.
Hardware needed: M5 bolt and nylock nut and two pieces of 2mm steel rod (I used an old bicycle spoke). The holes for the rods are a tight tolerance and may have to be drilled out and the pins hammered in.
Print spec
- Formats
- fcstdstl
- Model files
- 2
- Total size
- 9.7 MB
- Largest file
- 9.1 MB