Giá đỡ cảm biến nhiệt độ cho P1S

Magnet-less mounting bracket for a temperature and humidity sensor (this one).

The opening is 46,1 x 27,1 (mm) and can be adjusted for different sensors with the parameters in the F3D file.

Make sure the bracket is pushed all the way on the frame.

I recommend using a more temperature resistant material (eg. PCTG / PETG / ASA / ABS).

*estimated print time and material usage (P1S; 0,16mm layers; 3Djake PCTG; 3perimeters; no supports): 33m; +-12g