
Đế cỡ lớn cho Đèn sàn in 3D Modular của GregDeanMann
- Downloads
- 0
- Likes
- 0
- Views
- 24
- Remixes
- 0
- Comments
- 0
Files 1 85.5 MB
- base_lamp_base_support_object_1783850094.stlSTL · 85.5 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #410844
- Category
- Mỹ Thuật
- Published
- License
- Creative Commons — Public Domain
Description
This is a larger replacement base for the one provided with the paid design available here. In addition to the extra space there are support brackets and venting. A sacrificial support object is included if you're printing with PETG and PLA supports.
Note: The base has a 274mm diameter, so you'll need a larger printer.
Printing Instructions:
Don't add too many vertical shells, or this will impact the inset on the top object. I used the standard prusa structural settings with 50% infill to increase strength. You may want to add supports under the power supply port as well.
I strongly recommend avoiding PLA if you'll be storing a power supply or other electronics in the base.
I recommend setting vertical shell perimeters no higher than 2 - higher values may result in the top cutout getting bled into and the end-cap not fitting.
Related models:
You may also find the endcap reinforcement or T8 LED strip models helpful.
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 85.5 MB
- Largest file
- 85.5 MB
0 comments
You may also like 12 models
See all-

-

-
New -

-
New -

-
New -

-

-

-

-


