Thanh treo kẹp phơi đồ

A rail for clothespins, instead of a bag or pouch. Clips to an IKEA JÄLL drying rack and others.

Recommended print settings

• Supports are optional.
  If your filament droops a lot: enable on build plate only and uncheck remove small overhangs

• use a 0.4mm or, better yet, 0.6mm nozzle

• 3 walls

• UV-resistant material that’s a bit flexible, such as ASA

• select ‘concentric’ for as top surface pattern

• … use the supplied modifier if you prefer a different top surface pattern for the long and flat section (change the type to ‘modifier’!)