Vỏ bảo vệ cho bộ test cáp USB Treedix

I have created a housing for the Treedix usb cable tester. For which you need the optional acrylic plate and screws

Material:  Black PLA with 0.2mm layer height

Printed with Bambulab X1C

Required parts:

-4x M3x10mm screws

-Treedix USB Cable Tester with Acrylic case

https://www.amazon.com/dp/B0CF95VL2Y

If you want to replace the battery, simply loosen the top 4 screws and remove the electronic from the housing.

If you don't have the acrylic case, you can alternatively use some 16 mm nylon standoffs. You can use those along with 4x10 mm bolts from the bottom and 4x6 mm bolts from the top.