Dụng Cụ Tiện Ích 07/06/2026

Pat rackmount cho switch Meraki MS120/MS130

By bjornlljohans_169660

Downloads: 1
Likes: 0
Views: 30
Remixes: 0
Comments: 0

Download all (.zip)· 4 files · 475.3 KB· 475.3 KB

Files 4 475.3 KB

MS130-8X_rackmount_ears_M6-screw_1783342597.stlSTL · 114.1 KB
MS130-8X_rackmount_ears_12-24-screw_1783342598.stlSTL · 120.4 KB
MS120-8_rackmount_ears_M6-screw_1783342599.stlSTL · 120.4 KB
MS120-8_rackmount_ears_12-24-screw_1783342600.stlSTL · 120.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #408541
Category: Dụng Cụ Tiện Ích
Published: 07/06/2026
License: Creative Commons — Attribution — Noncommercial — Share Alike
Tags: rack
rackmount
racking
meraki
merakims125
merakims120
merakims130

Show more tags Show fewer tags

Description

Rackmount ears for

Meraki MS120-8FP, Meraki MS130-8X and Meraki MS130-12X (23cm wide)
Meraki MS120-8, Meraki MS120-8LP, Meraki MS130-8P and Meraki MS130-8P-I (22.2cm wide)

switches. The ears attach to the built-in wallmount ears of the switches with two screws on each side(I used the provided thumb screws that came with the switch).

Two models are provided for each model group fo either M6 machine screws, or imperial UNC 12-24 (5.6mm) screws.

NOTE: The MS120-8, MS120-8LP, MS130-8P and MS130-8P-I are 8mm narrower then the MS120-FP, MS130-8X and MS130-12X. This means that the ears for the wrong switch type may fit your rack, but no guarrantees are given, and depending on your rack using the wrong ears may not fit properly (ask me how I know...).

Made to be printed with cheap PLA and 50% infill and have been load tested for 1 year witout significant sag.