Bookmark Mèo và Chó phong cách Mosaic

A quick, sub-1-hour print to test all extruders on the Prusa INDX upgrade for CORE One+. 

Print at a 0.2mm layer height with a 0.4mm nozzle. 

There are two versions: 

• 4T: Four colors (black outline, white cat/dog + 2 mosaic colors)

• 8T: Eight colors (black outline, grey cat/dog + 6 mosaic colors) 

I recommend printing the outline in black, and the cat/dog body in white/grey/similar neutral color. The 8T version also has white for the eyes, which is then used for some of the tiles - this can be replaced. The remaining colors can be anything vivid you have at home, especially for the 8T version.  

If you want to adjust the color scheme or add/remove colors, I suggest using EasyPrint - it's much faster to paint individual mosaic tiles there rather than in PrusaSlice.

You can also print it slightly smaller (tested at 13cm length) - just make sure to leave the original thickness, so that it's printed with at least 3 layers.

Model creation

Original illustration by: @me_just_b

Turned the illustration into an SVG sketch in Adobe Illustrator, then extruded it into a 3D model in Autodesk Fusion. Colors were assigned in EasyPrint.