Skip to main content
F3D
Thùng rác mini gắn bàn (In-Desk Mini Trash Can) 1

4 images

Đồ Gia Dụng

Thùng rác mini gắn bàn (In-Desk Mini Trash Can)

By Tmpx64

Downloads
3
Likes
3
Views
81

Files 3 587.1 KB

  • Cover_1782832507.stlSTL · 269.5 KB
  • Rim_1782832508.stlSTL · 219.6 KB
  • Container_1782832509.stlSTL · 97.9 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This is a compact, discrete mini trash bin designed to fit perfectly inside standard 60mm desk cable grommet holes.

  • Supports: Minimal supports are required only for the hinge loops on the Rim (Flange). The Lid and Bin Body can be printed support-free.

  • Infill: 15-20% is more than enough.

  • Material: Works great with PLA, PETG, ABS, or ASA (I personally printed mine in ASA).

🛠 Assembly Instructions

  1. Connect the Rim and Body: Apply a small amount of super glue (CA glue) or plastic cement to the mating surface and glue the Rim securely to the Bin Body (I printed this with ASA and used acetone to chemically weld the parts together).

  2. Install the Lid: Align the hinge holes of the Lid with the Rim. Take a short piece of standard 1.75mm filament, slide it all the way through the hinge to act as a pin, and snip off the excess. (Tip: You can slightly melt the ends of the filament pin with a lighter or soldering iron to permanently lock it in place).

Read more Show less

Print spec

Formats
stl
Model files
3
Total size
587.1 KB
Largest file
269.5 KB

0 comments

See all