Nhãn dán cho hệ thống ngăn kéo Ultimate

The brilliant Ultimate Drawer System (https://www.thingiverse.com/thing:2302575) is great for storage - but it helps to label the drawers. These are very simple tags that fit in the slots already provided in the drawer design. The 1U size uses two tags, one on each side of the handle, while the 2U size spans across over the handle to provide more space.

These are intended to be used with a marker. The side touching the baseplate is smooth enough to use dry erase - you can see some of my print has wiped off the small tag - but that might still soak in and not erase fully. You could also print labels and glue to the tags. You could even modify the design to print text, but I found even .12 mm resolution insufficient for a decent amount of text.

I didn't do larger tags for the 3U-6U drawers, because the designed notches are only 1U high, so I suspect larger tags would sag forward or even fall out. If you try one, though, let me know how it works for you. You should just need to make it 2 cm higher for each unit.

Print Settings

Printer Brand:

Creality

Printer:

Ender-3 v2

Rafts:

No

Supports:

No

Resolution:

.2 mm

Infill:

20%

Filament: Sunlu PLA Shiny Silk Silver

Notes:

Any light colored filament should work.

Category: Tool Holders & Boxes