GPGF-GLB GridLatchBox - Hộp đựng máy Dremel 8150 chuẩn Gridfinity

Why I made this:

• I got a Dremel 8150 and wanted a good way to store it + bits in a drawer

• Neat if the organizer was Gridfinity-compliant

Why this is cool:

• This is part of the GPGF-GLB GridLatchBox collection

• It's an implementation of a soon-to-be-released bit of Featurescript for Onshape that lets you generate a Gridfinity-compliant latching box

• You can keep your Dremel + bits all together

Putting it together:

• You will need 6x M3 x 30 mm screws. I used socket head screw because that's what I have on hand, but you can use button heads. Or even headless screws! These are used for the hinges as well as the snap latches.

• You will need a handful of M3 x 14 mm thread forming flat head screws to attach the insert holder to the box. You could probably just send it with some machine screws, but I keep thread forming screws on hand.

• Print the parts! 

• I recommend printing the latches in PETG or something besides PLA, but PLA is probably fine too.

• Attach the inserts to the bottom of the box by using the M3 thread-forming screws from the bottom.

Additional notes:

• I used Tooltrace to make the original contour of the Dremel itself. 

• Not marking the model as AI-generated since the AI bit of things was literally just for tracing the initial outline.

Hope you enjoy!

Changelog:

• Replaced the left bits organizer with -02 to fix an error with the pocket depths. Removed the prior model since it's not good.

• Replaced the .3mf with one that includes this updated 3D (also _02)