Giá Treo Bóng Golf Gắn Tường

This model is easily printed with the nail holes down. I recommend 2 walls and top and bottom layers for the best wall strength, with 8.5 gyroid infill to keep filament usage low while still holding the golf balls you need. While testing the print, I learned that black, gray, and navy blue fillaments are the best for making the golf balls pop and not blend into the mount. To actually hold the mount to the wall, I found 2 nails for each mount for the needed strength. The diameter of the nail holes is 3mm, and for the 3x3 its best to put a nail in opposite corners and one in any nail holes on the smaller mounts. If you want a different sizing please comment, and I will try to make it as soon as possible, or you can challenge yourself to build it on your own. These models are different than my old ones but much better to print, and they also look better in my opinion.