Chân đế giảm rung cho BambuLab X2D

Vibration damping feet to fit a BambuLab X2D. You will need four of them.

Nothing complicated, just some TPU feet for the X2D. Designed to fit around the factory feet, and provide a bit of damping and some extra height. No extra parts required, just lift a corner of the printer and slip them in.

I printed these in Elegoo TPU 95a, five walls, five top and bottom surfaces and 25% infill.

Each foot needs about 24 grams of filament. 

Its a bit of a compromise to get right, too weak and they will collapse under the weight of the printer, too strong and they won't do so much damping. My figures were a guess, and seem to work OK.