Đầu phun tay quay máy rửa bát

This is a remix of a replacement spray arm nozzles for the Tricity Bendix TBDW41 but will fit others, including my Zanussi ZDT 6256, other Zanussi models and also Electrolux models.

Like a comment on the original model, I had to increase the model scale by 1.03 but this is already done in my remix model. No need to make the change in your slicer. 

I also made the following changes:

• Added bigger retainer ramp (1.2mm) on sleeves

• Added wider and curved retainer clips on each nozzle

• Added thicker top & side layers to retainer clips on each nozzle

• Added fillet to top of retainer clips on each nozzle

• Added fillets to both upper/inner sides of lower arm spray nozzle as walls too thin even with 0.15mm print

It has more robust retaining clips and the insert sleeves have a deeper retainer ramp to keep the entire solution on the metal arm

I printed using PCTG due to heat resistance, and durability. ASA would also be suitable. I would not recommend PETG (unless you can source PETG that can handle 90+ degrees C) and never use PLA!!!!!

I printed with support, organic/trees. See project file for orientation.