Túi Tote In 3D Dạng Vải Fidget

My Cloth 3d Printable fabric has a secret super-power, it can be built into 3D objects! 

Ever tried 3D Printing an entire tote bag?

• If you are having trouble getting the units to snap together, dip it in some warm water, or give it some heat. Forcing it can deform the pegs which makes the final chain-link weaker. 

Before Printing The total Bag, Test a print of a strip and dial your settings in to get it right. Otherwise you can end up with a bag that is too tight, or so loose that it falls apart. Different filaments behave differently, and I advise using filament that doesn't have a ton of additives. 

For Best Results, 0.1mm layer height. Tighter is better as it can loosen over time, so increase flow if the joints are too loose. 

Assembly: 

1. Simply print the file out - in PLA or whatever you like.

2. You will want to arrange all the pieces of fabric to make sure everything fits together well.

3. Snap together two big pieces so that the side fringe is miss-matched with connectors..

4. Snap together the two sides onto the big piece, starting from the very top. 

5. Work your way down both corners until the entire bag is assembled. 

6. Snap on the two straps and middle part and you are done!  

Enjoy your awesome tote bag! It is actually surprisingly strong, though I would tell people, this is just for decoration. Don't go carrying all your college textbooks in it. :P.